Barents Boat

Barents Boat 36 til salgs.

Nybygg bygget etter Norsk Standard, med Nogva motor og gir, generator, som selges til meget redusert pris, ta kontakt for besiktning i Tyrkia, instrumentering og frakt + utrustning kommer i tillegg.

Spesifikasjoner:

• Tilstand: Brukt.
• Merke: Andre.
• Modell: Barents Boat.
• Modellår: 2023.
• Type: Yrkesbåt/Sjark/Skøyte.
• Drivstoff: Diesel.
• Motor ink: Ja.
• Motorstørrelse: 450 hk.
• Motorfabrikant: Scania (Nogva).
• Type motor: Innenbords.
• Topphastighet: 9 knop.
• Byggemateriale: Annet.
• Vekt: 50 000 kg.
• Lengde i fot: 36 fot.
• Dybde: 270 cm.
• Bredde: 550 cm.
• Sitteplasser: 6.
• Soveplasser: 4.
• Farge: Blå.
• Båtens Beliggenhet: Utlandet (Tyrkia).

Utstyr:

• 2 x NOGVA SCANIA MARINE ENGINES TYPE DI13 71M (ICFN).
• The engine is a 6-cylinder in line, 4-cycle, turbocharged marine diesel engine developing 500 HP at 1800 rpm. Displacement: 12,7 liter.
• Cooling system: Keel cooled version (1 x circuite) prepared for keel cooling. Watercooled exhaust manifold. Dry exhaust elbow.
• Electrical system: The engine will be delivered with 24 Volt electrical system with 7 kW starting motor and 1x100A alternator. NOGVA motor computer monitoring system type T3 with standard specification.
• Details: - Watercooled chargeair-cooler - Airfilter.
• - Turbocharger with oil filter.
• - Racor duplex pre-filter type 75900MAXM10.
• - Fuel filter.
• - Electrical sump pump for engine and gearbox.
• - Flywheel housing SAE No. 1 & Flywheel 14”.
• - Silencer for dry exhaust & Flexible compensator - Parts catalogue & Instruction manual.
•  
• Price engines as specified above ………………………………….
•  
• NOGVA marine gearbox type HC-258 with reduction ratio 3,03:1. The gearbox will be delivered with built-in servomechanism and shaftbrake. Oil-cooler. Detailed specification according to spec. sheet.
• The gearbox is mounted on the engine.
• Price gearboxes as specified above ……………………………
•  
• NOGVA 4-blade controllable pitch propeller type N4-260 with propellerdiameter 1150 mm model 3364H. Propellershaft Ø85 x 2500 mm. Water lubricated bearing and flexible stuffingbox. Alu. water lube sterntube 1000m.
• Price propeller as specified above …………………………………
•  
•  
• Price transfer from last page ……………………………………………….
•  
• ADDITIONAL EQUIPMENT:
• NOK. 2.062.000,-
• 2 x PTO`s, one on each gearbox with SAE “C” spline. …………..
• 2 x Additional price for SAE ”D” spline on PTO ………………….-
• 2 x HCK-Main, remote control in wheel-house ……….…………
• 2 x HCK-Remote, remote control on working-deck. …………….
• 1 x Extra alternator 150A mounted on SB engine …………………………
• 2 x Johnson 2” bilge pump, one on each engines ……………….
• 3 x Bracket for the extra alternator and bilge pump ………………..
• 2 x Pully for the extra alternator and bilge pump …………………..
• 16 x Vibration dampers under engine and gearbox …………………
• 2 x Keel cooling pipes ……………………………………………...
• 2 x Actuator for RPM adjustment (mechanical maneuver system) ..
• 2 x Engine/gearbox lube oil ……………………………….………..
• 2 x Engine coolant heater …………………………………………..
• 2 x EIAPP- certificate ………………………………………………
• Packing NOK.
• Price net. price pr. Ship-set with specification listed above.
•  
•  
•  
• OPTION: ==============
• Additional price for extra length on the propeller shaft (pr. mtr.) ………….. Additional price for extra length on the standard alu. water lube stern tube NOK.
• (pr. mtr.) …………………………………………………………………..… NOK.
• Additional price for one extra PTO on each gearbox ………………………. NOK.
• Additional price for SCR system according to IMO Tier III (pr engine) …... NOK.
•  
•  
•  
•  
• John Deere auxiliary engine type 6068TFM50, with Stamford alternator type UCM274E1.
• Technical Specification
•  
• John Deere auxiliary engine type 6068TFM50
• Engine output, prime power 1500 rpm 89 kW
• + 10% Overload
• No. of cylinders In line 6
• Working principle 4 stroke
• Displacement 6,8 dm3
• Bore 106 mm
• Stroke 127 mm
• Compression ratio 17,0:1
• Rotation, seen from flywheel end Counter clockwise
•  
• Specific fuel consumption
• 1500 rpm
• 1/1 load l/h 23,9
•  
• The engine 6068TFM50 acc too IMO (Marpol 73/78)
• Standard equipment
• Injection pump with mechanical governor.
• Flexible fuel tubes inlet/outlet fuel system.
• Fuel filters and Oil cooler.
• Water cooled exhaust manifold.
• Mechanical oil drain pump.
• Mechanical gauges for oil pressure.
• Mechanical gauges for cooling water temperature.
•  
• Cooling system
• Keel cooled version (1 x circuite) prepared for keel cooling pipe, keel cooling pipe included. Watercooled exhaust manifold. Dry exhaust elbow.
•  
• Starter system
• El. Starter 24 volt 4,6 kW 2-pole.
• Battery arrangement not included.
•  
• Heater
• The engine will be delivered with engine heater.
•  
• Exhaust
• 90 bend and exhaust Compensator, silencer type DDA 4".
•  
• Fuel filter
• Racor duplex pre- filter type 75500MAXM10.
•  
• Air Cleaner
• Light duty, unit cleaner. For mounting on engine.
•  
• Diesel Engine Control and Alarm Unit
• Read Matre D1 shut down unit, alarms can be connected to main engines T3 panel.
• Alarm Functions High cooling water temp.
• Low lube oil pressure.
• Low water level.
•  
• Auto Stop Functions Overspeed 1500rpm +15% High cooling water temp.
• Low lube oil pressure.
•  
• Amco Veba Dekks kran,
• Søsterskip er Vestvåg i Hammerfest og Dosær i Vestnes, bilder er fra Vestvåg, Dosær og Tim